IBLOG

Izinkinga ezivamile nezindlela zokuthuthukisa phakathi nenqubo yokunemba ye-CNC yokwenza imishini

I-Collider - Ukuhlela

Isizathu:
1. Ubude bokuphepha abanele noma abasethiwe (ummese noma i-chuck ishaya ucezu lokusebenza ngesikhathi sokuphakelwa okusheshayo kwe-G00).
2. Ithuluzi elisohlwini lohlelo kanye nethuluzi lohlelo lwangempela kubhalwe ngokungalungile.
3. Ubude bethuluzi (ubude be-blade) kanye nokujula komshini kwangempela ohlwini lohlelo kwakubhalwe ngokungalungile.
4. Inombolo yokujula kwe-axis engu-z kanye ne-axis engu-Z yangempela ohlelweni olulodwa abhalwe ngokungalungile.

5. Ukuhlelwa okungalungile kokudidiyela ngesikhathi sohlelo.

Ukuze uthuthukise:
1. Ukulinganisa okunembile kobude be-workpiece futhi kuqinisekisa ukuthi ukuphakama kokuphepha kungaphezu kwendawo yokusebenza.
2. Amathuluzi okusika ohlwini lohlelo kufanele ahambisane nohlelo lwangempela (zama ukusebenzisa okuzenzakalelayo noma isithombe ukuze wenze uhlu lohlelo).
3. Linganisa ukujula kwangempela komshini ku-workpiece, bese ubhala ubude nobude be-blade be-cutter ngokucacile ohlwini lohlelo (ngokuvamile, ubude bamathuluzi buphakeme ngo-2-3mm kunomsebenzi wokusebenza, kanti ubude be-blade buyi-0.5-1.0 mm ngokugwema umoya).

4. Thatha inombolo yangempela ye-axis engu-z kucezu lokusebenza bese uyibhala ngokucacile eshidini lohlelo. (Lokhu kusebenza ngokuvamile kubhalwa ngesandla futhi kufanele kuhlolwe kabili).

V. Collider – Opharetha
Isizathu:
1. Ukujula kwephutha lombese we-axis ·.
2. Inombolo engalungile yokuthinta nokusebenza (isb, ayikho indawo yokudla yohlangothi olulodwa).
3. Ukusebenzisa ummese okungewona (isb. i-D4 icutshungulwa ngo-D10).
4. Uhlelo aluhambanga kahle (isb. I-A7.NC ayihambanga kahle A9.NC ayihambanga kahle).
5. Isondo lesandla lalijikijelwa endaweni engafanele ngesikhathi lisebenza ngesandla.

6. Cindezela indlela okungeyona uma uphakela ngokushesha (isb: -x cindezela +X).

Ukuze uthuthukise:
1. Naka indawo yokujula kommese we-axis engu-z.(phansi, phezulu, ukuhlaziya, njll.)
2. Hlola inani lokushayisana nenombolo yokusebenza ngokuphindaphindiwe ngemva kokuqedwa.
3. Ithuluzi kufanele lihlolwe kaningi ngeshidi lohlelo nohlelo ngaphambi kokufakwa.
4. Uhlelo kufanele luhambe ngokulandelana.
5. Uma usebenzisa ukusebenza ngezandla, opharetha kufanele athuthukise ulwazi lwethuluzi lomshini.

6. Endabeni yokunyakaza okusheshayo kwe-manual, i-axis ye-z ingaphakanyiswa ukuze ihambe ku-workpiece.

I-JIUYUAN ibe nenzuzo kuyo aluminium CNC machining izingxenye,anodized CNC izingxenye machining,izingxenye zensimbi ze-CNC zemishini,izingxenye zemishini yepulasitiki ye-CNC, ukunemba okuhlukahlukene kwezingxenye zemishini ye-CNC.I-JIUYUAN izokusiza ukuthi uthole izixazululo ezingcono kakhulu zamaphrojekthi akho.